CURA – Tree Supports vs Standard Supports

CURA – Tree Supports vs Standard Supports

On today’s episode let’s talk about supports in Cura. Supports are the plastic that go underneath overhangs so it doesn’t droop or fall. And there’s two types of supports I want to show you. The

event_note
close

On today’s episode let’s talk about supports in Cura. Supports are the plastic that go underneath overhangs so it doesn’t droop or fall. And there’s two types of supports I want to show you. The

folder_open Articles, Blog
Read more
CURA 4.0 vs CURA 3.6 3D Printing Slicer Feature Review

CURA 4.0 vs CURA 3.6 3D Printing Slicer Feature Review

This week Ultimaker released Cura version 4.0. It’s been in beta for a while, I’ve been playing with it, but now it’s officially released. So let’s take a look at version 4.0 of Cura and

event_note
close

This week Ultimaker released Cura version 4.0. It’s been in beta for a while, I’ve been playing with it, but now it’s officially released. So let’s take a look at version 4.0 of Cura and

folder_open Articles, Blog
Read more
Multi-Color 3D Print in CURA 3 on ENDER 3

Multi-Color 3D Print in CURA 3 on ENDER 3

In previous videos I showed you how to make multicolor signs like this or even my Filament Friday sign, using a single nozzle printer and simplify 3d. Today I’m going to show you how I

event_note
close

In previous videos I showed you how to make multicolor signs like this or even my Filament Friday sign, using a single nozzle printer and simplify 3d. Today I’m going to show you how I

folder_open Articles, Blog
Read more

Better Quality 3D Prints Using MAGIC NUMBERS on ENDER 3, CR-10, A10

Did you know that your 3d printer has a magic number and if you use that magic number you can get better print quality I’ll explain it all on today’s Filament Friday. This episode of

event_note
close

Did you know that your 3d printer has a magic number and if you use that magic number you can get better print quality I’ll explain it all on today’s Filament Friday. This episode of

folder_open Articles
Read more
Getting Started with 3D Printing using ENDER 3

Getting Started with 3D Printing using ENDER 3

Were you thinking about getting into 3D printing and don’t know where to start? Well I’ll explain it all right here at Filament Friday. This episode of Filament Friday is brought to you by these

event_note
close

Were you thinking about getting into 3D printing and don’t know where to start? Well I’ll explain it all right here at Filament Friday. This episode of Filament Friday is brought to you by these

folder_open Articles, Blog
Read more
CURA – Quality Printing Without a Cooling Fan!

CURA – Quality Printing Without a Cooling Fan!

Many people have asked me if I’ve tested different cooling ducts on the filament cooling fan of my Ender three or of the CR 10’s and I have. And I don’t see a major improvement.

event_note
close

Many people have asked me if I’ve tested different cooling ducts on the filament cooling fan of my Ender three or of the CR 10’s and I have. And I don’t see a major improvement.

folder_open Articles, Blog
Read more
Cura Fuzzy Skin and Ironing on 3D Prints

Cura Fuzzy Skin and Ironing on 3D Prints

I like to print on a glass bed that way I get a smooth surface on the bottom or flip it over and get a smooth surface on the top of my 3d prints. But

event_note
close

I like to print on a glass bed that way I get a smooth surface on the bottom or flip it over and get a smooth surface on the top of my 3d prints. But

folder_open Articles, Blog
Read more